{"id":173258,"date":"2025-06-20T05:51:41","date_gmt":"2025-06-20T05:51:41","guid":{"rendered":"https:\/\/linuxiac.com\/?p=173258"},"modified":"2025-06-20T05:51:49","modified_gmt":"2025-06-20T05:51:49","slug":"how-to-upgrade-to-almalinux-10-from-almalinux-9","status":"publish","type":"post","link":"https:\/\/linuxiac.com\/how-to-upgrade-to-almalinux-10-from-almalinux-9\/","title":{"rendered":"How to Upgrade to AlmaLinux 10 from AlmaLinux 9"},"content":{"rendered":"\n

After Red Hat rolled out RHEL 10<\/a>, and AlmaLinux 10<\/a> quickly followed, it\u2019s no surprise that many AlmaLinux users are now looking for a way to upgrade their version 9 systems to the latest release.<\/p>\n\n\n\n

The good news? Thanks to the ELevate project<\/a>, an open-source initiative designed to streamline in-place upgrades between major versions of RHEL\u2011based distributions, AlmaLinux has made the upgrade process straightforward and fully supported.<\/p>\n\n\n\n

In this guide, I\u2019ll walk you through every upgrade process step from Alma 9 to Alma 10, ensuring you can make the transition smoothly and hassle-free.<\/p>\n\n\n\n

Step 1: Take System Backup<\/h2>\n\n\n\n

First, let\u2019s ensure all your important data is safe. Before doing anything else, I strongly recommend fully backing up your Alma installation using one of the system snapshot tools you’re familiar with. If you’re not sure which one to go with, check out my recommendations<\/a> on the topic.<\/p>\n\n\n\n

Thus, if something goes wrong, you can restore it with all the vital data to its previous state.<\/p>\n\n\n\n

However, if you do not feel like taking the above approach, you can instead use a command like the one shown below, which will archive all of the more critical directories and their contents in a tar.gz archive<\/a>.<\/p>\n\n\n

sudo tar czf \/alma9.tar.gz \\\n     --exclude=\/alma9.tar.gz \\\n     --exclude=\/dev \\\n     --exclude=\/run \\\n     --exclude=\/mnt \\\n     --exclude=\/proc \\\n     --exclude=\/sys \\\n     --exclude=\/tmp \\\n     --exclude=\/media \\\n     --exclude=\/lost+found \\\n     \/<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
Step 2: Update All Software<\/h2>\n\n\n\n
Ensure you have a fully updated Alma 9 system. Run the two commands below to ensure no packages are waiting to be updated. If there are, apply them (and reboot if necessary) before moving on.<\/p>\n\n\n
sudo dnf update<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
Here is our fully updated AlmaLinux 9 system before upgrading to AlmaLinux 10.<\/p>\n\n\n\n
\"AlmaLinux<\/a>
AlmaLinux 9<\/figcaption><\/figure>\n\n\n\n
Step 3: Migrate AlmaLinux 9 to AlmaLinux 10<\/h2>\n\n\n\n
Before we start, let\u2019s say a few words about the tool that will help us with the migration:\u00a0ELevate<\/a>.<\/p>\n\n\n\n
Developed by AlmaLinux, it supports migrations between major versions of Red Hat Enterprise Linux forks (Alma, Rocky, Oracle), allowing users to migrate from CentOS 7.x to 8.x versions of the RHEL derivative or upgrade from 8.x to 9.x within the same.<\/p>\n\n\n\n
Support for upgrading from AlmaLinux 9 to 10 was recently added, and this guide explicitly uses that feature.<\/p>\n\n\n\n
Step 3.1: Install the ELevate Tool<\/h3>\n\n\n\n
The first step in the upgrade process is installing the \u201celevate-release<\/em>\u201d package on your current Alma 9 system.<\/p>\n\n\n
sudo dnf -y install http:\/\/repo.almalinux.org\/elevate\/elevate-release-latest-el$(rpm --eval<\/span> %rhel).noarch.rpm<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
\"Install<\/a>
Install the ELevate Tool<\/figcaption><\/figure>\n\n\n\n
Step 3.2: Install Leapp and Migration Data<\/h3>\n\n\n\n
The migration process is based on a combination of Red Hat\u2019s\u00a0Leapp<\/a>, a framework designed to facilitate in-place upgrades of RHEL systems from one major version to another, plus the distro-specific data package “leapp-data-almalinux<\/em>” that contains the rules, configurations, upgrade actors, and metadata tailored specifically for AlmaLinux.<\/p>\n\n\n\n
So, let\u2019s install them:<\/p>\n\n\n
sudo dnf install -y leapp-upgrade leapp-data-almalinux<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
\"Install<\/a>
Install Leapp and Alma\u2019s migration data.<\/figcaption><\/figure>\n\n\n\n
Step 3.4: Start Pre-Upgrade Checks<\/h3>\n\n\n\n
The next step in the Leapp in-place upgrade process is to start a pre-upgrade check. It performs a non-intrusive, pre-upgrade assessment of your current system and generates a detailed report ( \u201c\/var\/log\/leapp\/leapp-report.txt<\/em>\u201d) on whether your system can be safely upgraded to the next major version, AlmaLinux 10, in this case.<\/p>\n\n\n\n
It\u2019s important to understand that the below command is completely non-destructive\u2014i.e., it has\u00a0not upgraded anything yet<\/strong>. Instead, it gives you a preview\u00a0of what will happen and whether you\u2019re ready to proceed.<\/p>\n\n\n
sudo leapp preupgrade<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
Once the command is complete, you will see an output similar to the one below.<\/p>\n\n\n\n
\"Pre-upgrade<\/a>
Pre-upgrade check succeeded.<\/figcaption><\/figure>\n\n\n\n
The most important thing is to make sure that both the \u201cErrors<\/em>\u201d (no internal Leapp errors occurred during execution) and \u201cInhibitors<\/em>\u201d (no critical issues that would block the upgrade) lines show a value of 0.<\/p>\n\n\n\n
If this number is greater than 0, the upgrade will not proceed. Since it’s zero, you’re good to go.<\/p>\n\n\n\n
The “HIGH severity reports<\/em>” are serious warnings\u2014<\/span>they won\u2019t stop the upgrade, but they indicate potential problems post-upgrade. In situations like this, I highly recommend checking the “\/var\/log\/leapp\/leapp-report.txt<\/em>” file to get a clear picture of any potential issues that might come up.<\/p>\n\n\n
sudo less \/var\/log<\/span>\/leapp\/leapp-report.txt<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
Step 3.5: Start the Actual Migration from AlmaLinux 9 to 10<\/h3>\n\n\n\n
Run the following command to initiate the actual in-place upgrade process. It\u2019s the second major step after running leapp preupgrade<\/code>, and it transforms your AlmaLinux system from one major version to the next (e.g., AlmaLinux 9 > 10).<\/p>\n\n\n
sudo leapp upgrade<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
The command downloads and stores the necessary packages needed for the upgrade in a temporary folder, but the upgrade hasn\u2019t been started yet. That will happen after the reboot.<\/p>\n\n\n\n
This step involves downloading many packages (at least 1\u20132 gigabytes), so depending on your internet speed, it might take a little while. So, hang tight and let it finish. Then, you\u2019ll be offered to reboot the system, so do it.<\/p>\n\n\n\n
\"Migration<\/a>
Migration from AlmaLinux 9 to 10.<\/figcaption><\/figure>\n\n\n
sudo reboot<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
Since the package upgrades involve a lot of background activity, the process will take a while. Please be patient if you cannot access the terminal to track these changes.<\/p>\n\n\n\n
Depending on your hardware\u2019s capabilities and the number of updated packages, it could take anywhere from a few minutes to half an hour.<\/p>\n\n\n\n
\"Upgrading<\/a>
Upgrading AlmaLinux 9 to 10.<\/figcaption><\/figure>\n\n\n\n
The system will automatically reboot in the final loop, and the\u00a0GRUB bootloader will greet you. The list should now include the Linux kernel 6.12 used by AlmaLinux 10 (Purple Lion).<\/p>\n\n\n\n
\"GRUB<\/a>
GRUB bootloader.<\/figcaption><\/figure>\n\n\n\n
It’s time to congratulate yourselves\u2014you\u2019ve successfully transitioned your system from AlmaLinux 9 to 10.<\/p>\n\n\n\n
Step 4: Check the OS Version (Optional)<\/h2>\n\n\n\n
Quickly peek at the OS version<\/a> to ensure everything went according to plan.<\/p>\n\n\n
cat \/etc\/redhat-release<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
\"Successful<\/a>
Successful migration from AlmaLinux 9 to AlmaLinux 10.<\/figcaption><\/figure>\n\n\n\n
As you can see, everything went smoothly, and our system has been upgraded to AlmaLinux 10.0, the most current version available at the time of this writing.<\/p>\n\n\n\n
Post-Installation Steps<\/h2>\n\n\n\n
Now\u2019s a good time to clean up the leftover packages from AlmaLinux 9 since we don\u2019t need them anymore. To see what\u2019s still hanging around, run:<\/p>\n\n\n
rpm -qa | grep el9<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
\"Packages<\/a>
Packages left over from AlmaLinux 9.<\/figcaption><\/figure>\n\n\n\n
You can remove them one by one using the familiar DNF command<\/a>: dnf remove [package_name]<\/code>. But if you\u2019ve got a long list of packages, that can get pretty tedious. So here\u2019s a quicker way to take care of everything in one go.<\/p>\n\n\n
sudo dnf --disableexcludes=all remove $(rpm -qa | grep el9)<\/code><\/span>Code language:<\/span> Bash<\/span> (<\/span>bash<\/span>)<\/span><\/small><\/pre>\n\n\n
\"Cleaning<\/a>
Cleaning up the AlmaLinux 9 leftover packages.<\/figcaption><\/figure>\n\n\n\n
Conclusion<\/h2>\n\n\n\n
As you can see, upgrading from AlmaLinux 9 to AlmaLinux 10 is straightforward when you follow the right steps. Once the upgrade is complete, verify that all services are running correctly and that your applications are functioning as expected.<\/p>\n\n\n\n
I try to make this guide as simple as possible. Thanks for using it, and as always, your comments are welcome.<\/p>\n\n\n\n
For more information, visit Alma\u2019s official documentation<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"
Learn how to upgrade from AlmaLinux 9 to AlmaLinux 10 smoothly. Follow our step-by-step guide to ensure a hassle-free system upgrade.<\/p>\n","protected":false},"author":10,"featured_media":173261,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[9,4417],"tags":[3248,5417,4695],"class_list":["post-173258","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-tutorials","category-linux-knowledge","tag-almalinux","tag-enterprise-linux","tag-upgrade"],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/posts\/173258","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/comments?post=173258"}],"version-history":[{"count":0,"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/posts\/173258\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/media\/173261"}],"wp:attachment":[{"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/media?parent=173258"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/categories?post=173258"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/linuxiac.com\/wp-json\/wp\/v2\/tags?post=173258"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Feel free to add more \u201c\u2013exclude=<\/em>\u201d parameters if needed. Finally, the command creates a backup of all files in the \u201calma9.tar.gz<\/em>\u201d file located on the root partition (\/), which you should ideally transfer to another computer or drive, for example, using the SCP command<\/a>.<\/p>\n\n\n\n